Price Reduced Anest Iwata W200 Spraygun Heads

Strictly a limited time offer up until midday 28th June 2013 Anest Iwata W200 spray gun head only in 1.5mm, 1.8mm, 2.0mm and 2.5mm save more than $156.00 off list price! Only 6 weeks remain to take advantage of this fantastic offer from Anest Iwata.
Model options and specifications for this popular spray gun is as follows.

Part Number W200151 Anest Iwata W200 High TEC Spray Gun suitable for spraying Etch Primer, Stain, Air Dry Enamel and material with a viscosity below 18 seconds with a Ford Cup #4

•     1.5 mm fluid nozzle
•     2 bar or 28 psi compressed air operating pressure
•     200 litres per minute or 7.1 cfm compressed air consumption
•     240 ml/minute fluid output
•     210 mm maximum spray fan width
•     K1 air cap number

Part Number W200152 Anest Iwata W200 High TEC Spray Gun recommended for spraying Etch Primer, Stain, Air Dry Enamel, Polyurethane, Urethane, Top Coat Solid Colour 2K, Base Coat 2K, Base Coat Waterborne, Clear Coat 2K, High Solids 2K (80-85%), and material with a viscosity below 18 seconds with a Ford Cup #4

•     1.5 mm fluid nozzle
•     3 bar or 44 psi compressed air operating pressure
•     330 litres per minute or 11.7 cfm compressed air consumption
•     240 ml/minute fluid output
•     290 mm maximum spray fan width
•     K2 air cap number

Part Number W200182 Anest Iwata W200 High TEC Spray Gun suitable for spraying Etch Primer, Primer 1K, Stain, Furniture Lacquer, Acrylic Lacquer, Air Dry Enamel, High Solids 2K (80-85%), Contact Adhesive and materials with a viscosity between 18 seconds and 26 seconds with a Ford Cup #4

•     1.8 mm fluid nozzle
•     3 bar or 44 psi compressed air operating pressure
•     330 litres per minute or 11.7 cfm compressed air consumption
•     290 ml/minute fluid output
•     340 mm maximum spray fan width
•     K2 air cap number

Part Number W200201 Anest Iwata W200 High TEC Spray Gun suitable for spraying Etch Primer, Furniture Lacquer, Acrylic Lacquer and materials with a viscosity between 18 seconds and 26 seconds with a Ford Cup #4

•     2.0 mm fluid nozzle
•     3 bar or 44 psi compressed air operating pressure
•     290 litres per minute or 9.2 cfm compressed air consumption
•     350 ml/minute fluid output
•     350 mm maximum spray fan width
•     R1 air cap number

Part Number W200202 Anest Iwata W200 High TEC Spray Gun recommended for spraying Etch Primer, Furniture Lacquer, Acrylic Lacquer, Contact Adhesive and Epoxy and suitable for Primer 1K, and High Build Epoxy and other materials with a viscosity between 18 seconds and 26 seconds with a Ford Cup #4

•     2.0 mm fluid nozzle
•     3 bar or 44 psi compressed air operating pressure
•     360 litres per minute or 12.7 cfm compressed air consumption
•     350 ml/minute fluid output
•     350 mm maximum spray fan width
•     R2 air cap number

Part Number W200251 Anest Iwata W200 High TEC Spray Gun recommended for spraying Etch Primer and High Build Epoxy and suitable for spraying Contact Adhesive and Epoxy and other materials with a viscosity between 26 seconds and 33 seconds with a Ford Cup #4

•     2.5 mm fluid nozzle
•     3 bar or 44 psi compressed air operating pressure
•     360 litres per minute or 12.7 cfm compressed air consumption
•     440 ml/minute fluid output
•     280 mm maximum spray fan width
•     W1 air cap number