Wednesday 23 October 2013

Anest Iwata W400 BellAria Spray Guns

Anest Iwata have improved the W400 LV2 air cap by releasing two new air caps featuring Flat & Thin Technology TM

There is an air cap paired with the 1.0 and 1.2 mm models that consumes only 250 litres per minute of compressed air while the air cap designed for the 1.3, 1.4, 1.6 and 2.0 mm models consumes a low 270 litres per minute of compressed air.

These Anest Iwata BellAria atomising air caps deliver a stable and even spray fan pattern shape and are perfect for Clear Coat HS.


These new model Anest Iwata W400 BelAria can be ordered online now from spraygunonline.com.au in the Anest Iwata W400 Catalogue category.

Sunday 20 October 2013

Wagner Project 115 Airless Paint Sprayer Valve Replacement

Repair a Wagner Project 115 airless paint sprayer valves with these parts and procedure.
First obtain the following parts if wear or corrosion is suspected.

  • Part number 0418714 inlet valve repair kit
  • Part number 0504813 inlet valve tool
  • Part number 0515502 inlet valve sleeve if required



  1. Download Wagner Project Airless 115 manual refer to figure 20
  2. Remove the hopper.  Loosen the locknut by turning anticlockwise.
  3. Remove the inlet sleeve (1) with a suitable tool (e.g. socket SW 11).
  4. Inspect the threads on the inlet sleeve and the inlet sleeve O-ring (2).  Remove any accumulated paint.
  5. To remove the inlet valve, place the assembly aid (8) on a socket (6) with a 5/8” insert (7). Insert the inlet valve tool into the inlet valve (a). Remove the inlet valve screw connection by unscrewing anticlockwise from the housing.
  6. Retrieve the inlet valve (9) and the inlet valve O-ring (10) from the inlet valve housing. Clean or replace and lubricate the O-ring with a light household oil.  
  7. Set the inlet valve O-ring (10) back into the housing, and set the inlet valve (9) on top of it.
  8. Replace inlet fitting (8) into the housing. Tighten with the inlet valve tool (7) and ratchet (4, 5, 6).
  9. Replace the seal (3).  Place the inlet sleeve O-ring (2) onto the inlet valve fitting (9), and replace the inlet sleeve (1) by twisting it clockwise.
  10. Replace the hopper.






Saturday 12 October 2013

Replacement for Wagner Airless Tips

Available for purchase online direct are the full range of airless spray tips which are genuine Australian only stock and made in the USA.

The range of reversible airless spray tips available for purchase online include a solvent resistant seal and seat assembly with each spray tip and are a direct replacement for the Wagner TradeTip2 the Graco RAC V and the Titan SC6 series reversible airless spray tips.


    Enhanced by Zemanta

    ShareThis